Single Board Computer Archives | Promo Electronics https://promoltd.co.il/products_categories/single-board-computer/ Comprehensive Technical Solutions for the Electronics Industry Sun, 02 May 2021 10:08:59 +0000 en-US hourly 1 https://promoltd.co.il/wp-content/uploads/2020/06/favicon.png Single Board Computer Archives | Promo Electronics https://promoltd.co.il/products_categories/single-board-computer/ 32 32 3U OpenVPX SBC Model 68ARM2 https://promoltd.co.il/promo_products/3u-openvpx-sbc-model-68arm2/ Sun, 02 May 2021 09:07:22 +0000 https://promoltd.co.il/?post_type=promo_products&p=1652 The 68ARM2 is a 3U OpenVPX Zynq® UltraScale+™ Quad-core ARM® Cortex™-A53 MPCore™ based Single Board Computer that can be configured with up to three NAI Smart I/O and communications function modules. Ideally suited for rugged Mil-Aero applications, the 68ARM2 delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems in air, land and sea applications.

The post 3U OpenVPX SBC Model 68ARM2 appeared first on Promo Electronics.

]]> The 68ARM2 is a 3U OpenVPX Zynq® UltraScale+™ Quad-core ARM® Cortex™-A53 MPCore™ based Single Board Computer that can be configured with up to three NAI Smart I/O and communications function modules. Ideally suited for rugged Mil-Aero applications, the 68ARM2 delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems in air, land and sea applications.

The 68ARM2 includes BSP and SSK support for Wind River®VxWorks® and for Xilinx® PetaLinux and DDC-I Deos. In addition, SSKs are supplied with source code and board-specific library I/O APIs to facilitate system integration.

Features:

  • Supports three NAI smart I/O function modules
  • PCIe interface to function slot #2 (e.g. for 2 additional Gig-E ports option)
  • SATA II interface to function slot #3 (e.g. for 256 GB expansion option)
  • Xilinx Zynq® UltraScale+™ Quad-core ARM® Cortex™-A53 MPCore™ up to 1.3 GHz
  • 8 GB DDR4 SDRAM w/ ECC
  • 32 GB SATA II NAND Flash
  • Operating Systems Supported: Xilinx PetaLinux, Wind River® VxWorks®, DDCI-Deos
  • VITA 46.11 Tier-2, basic, compatible (configured option)
  • DO-178C & DO-254 DAL A
  • Cybersecurity & Anti-Tamper

Block Diagram

The post 3U OpenVPX SBC Model 68ARM2 appeared first on Promo Electronics.

]]> 3U OpenVPX SBC Model 68PPC2 https://promoltd.co.il/promo_products/3u-openvpx-sbc-model-68ppc2/ Sun, 05 Jul 2020 12:27:38 +0000 https://promoltd.co.il/?post_type=promo_products&p=1108 NAI’s 68PPC2 is a 3U OpenVPX, NXP® , QorIQ® T2080 quad-core processor, PowerPC-based, Single Board Computer (SBC) that can be configured with up to two intelligent function modules. Ideally suited for rugged defense, commercial aerospace, and industrial applications, the 68PPC2 delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems.

The post 3U OpenVPX SBC Model 68PPC2 appeared first on Promo Electronics.

]]> NAI’s 68PPC2 is a 3U OpenVPX, NXP® , QorIQ® T2080 quad-core processor, PowerPC-based, Single Board Computer (SBC) that can be configured with up to two intelligent function modules. Ideally suited for rugged defense, commercial aerospace, and industrial applications, the 68PPC2 delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems.

NAI’s NXP® PowerPCTM QorIQ® T2080 based SBCs offer a feature-rich, low power/low cost solution for current and future generations of rugged military-aero, SWaP-constrained embedded applications.

The 68PPC2 includes BSP and SSK support for Wind River® VxWorks® and DDC-I DeosTM. In addition, SSKs are supplied with source code and board-specific library I/O APIs to facilitate system integration.

Features:

  • 3U VPX / OpenVPX (ANSI/ VITA 46 & VITA 65) SBC with support for 2 independent, intelligent function modules
  • 70+ modules to choose from
  • PCIe interface to function slot #1 (e.g. for 2 additional Gig-E ports option)
  • SATA II interface to function slot #2 (e.g. for 256 GB expansion function option)
  • COSA® architecture
  • NXP® QorIQ® T2080 Quad-Core e6500 Processor @1.5 GHz
  • Up to 8 GB DDR3 SDRAM
  • Up to 32 GB SATA II NAND Flash (256 GB expansion option in slot #2)
  • < 20 W MB power dissipation
  • Front and/or rear I/O
  • 2x 10/100/1000 Base-T or 2x 1000 Base–KX Ethernet
  • 1x USB 2.0, to front maintenance J5 and 2x USB 3.0 to rear
  • 1x RS-232 console port; to front maintenance J5 and rear I/O
  • 4x TTL I/O to rear I/O
  • I2C Bus to rear I/O
  • Wind River® VxWorks® and DDC-I DeosTM OS support
  • Intelligent I/O library support available
  • Continuous Background Built-In-Test (BIT)
  • VICTORY Interface Services (contact factory)
  • Commercial and rugged versions
  • Designed to meet ANSI / VITA 47 environmental requirements
  • Operating temperature: 0° C to 70° C commercial, -40° C to +85° C rugged

The post 3U OpenVPX SBC Model 68PPC2 appeared first on Promo Electronics.

]]> 3U OpenVPX SBC Model 68ARM1 https://promoltd.co.il/promo_products/3u-openvpx-sbc-model-68arm1/ Sun, 05 Jul 2020 11:52:34 +0000 https://promoltd.co.il/?post_type=promo_products&p=1096 NAI’s 68ARM1 is a 3U VPX ARM® Cortex®-A9-based, Single Board Computer (SBC) that can be configured with up to three smart function modules. Ideally suited for rugged defense, commercial aerospace, and industrial applications, the 68ARM1 delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems.

The post 3U OpenVPX SBC Model 68ARM1 appeared first on Promo Electronics.

]]> NAI’s 68ARM1 is a 3U VPX ARM® Cortex®-A9-based, Single Board Computer (SBC) that can be configured with up to three smart function modules. Ideally suited for rugged defense, commercial aerospace, and industrial applications, the 68ARM1 delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems.

The ARM® Cortex®-A9 processor is a low power, cost-sensitive, multi-core processor delivering exceptional levels of performance and power efficiency with all the functionality required in rugged, embedded SWaP-optimized programs for the Defense and Aerospace industries.

The 68ARM1 includes BSP and SSK support for Wind River®VxWorks®, and for Xilinx® PetaLinux and DDC-I Deos. In addition, SSKs are supplied with source code and board-specific library I/O APIs to facilitate system integration.

Features:

  • VPX / OpenVPX (ANSI / VITA 46 & VITA 65) Profile: Data plane: 4×1 PCIe, Control plane: 2x 10/100/1000Base-T, or 2x 1000Base-KX 
  • ARM® Cortex®-A9 Dual Core 800 MHz Processor
  • 512 MB DDR3L SDRAM
  • 32 GB On-Board SATA II NAND Flash
  • Expansion SATA II Flash support available: On-board module 3 (pending) or, External SATA II port access (pending)
  • < 10 W motherboard power dissipation
  • Up to 3 independent intelligent I/O function modules supported
  • Front and/or rear I/O
  • 70+ modules to choose from
  • Commercial or rugged applications
  • Independent x1 SerDes interface to each function module slot
  • 2x 10/100/1000 Base-T Ethernet; 2 to rear or 1 to rear and 1 to front I/O; or 2x 1000Base-KX to rear I/O
  • IPMC to rear I/O
  • 1x USB 2.0 port to rear or front I/O
  • 1x RS232 to front or rear I/O
  • Designed to meet ANSI / VITA 47 environmental requirements
  • Operating temperature: 0° C to 70° C commercial, -40° C to +85° C rugged
  • Wind River® Linux, VxWorks® and Xilinx® PetaLinux and DDC-I Deos™ OS support
  • Continuous Background Built-In-Test (BIT) (as applicable)
  • Intelligent I/O library support included
  • COSA® architecture
  • VICTORY Interface Services (Contact factory)

The post 3U OpenVPX SBC Model 68ARM1 appeared first on Promo Electronics.

]]> 3U cPCI SBC Model 75ARM1 https://promoltd.co.il/promo_products/3u-cpci-sbc-model-75arm1/ Sun, 05 Jul 2020 10:25:06 +0000 https://promoltd.co.il/?post_type=promo_products&p=1089 NAI’s 75ARM1 is a 3U cPCI ARM® Cortex®-A9-based, Single Board Computer (SBC) that can be configured with up to three smart function modules. Ideally suited for rugged defense, commercial aerospace, and industrial applications, the 75ARM1 delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems.

The post 3U cPCI SBC Model 75ARM1 appeared first on Promo Electronics.

]]> NAI’s 75ARM1 is a 3U cPCI ARM® Cortex®-A9-based, Single Board Computer (SBC) that can be configured with up to three smart function modules. Ideally suited for rugged defense, commercial aerospace, and industrial applications, the 75ARM1 delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems.

The ARM® Cortex®-A9 processor is a low power, cost-sensitive, multi-core processor delivering exceptional levels of performance and power efficiency with all the functionality required in rugged, embedded SWaP-optimized programs for the Defense and Aerospace industries.

The 75ARM1 includes BSP and SSK support for Wind River® VxWorks®, and for Xilinx® PetaLinux and DDC-I Deos. In addition, SSKs are supplied with source code and board-specific library I/O APIs to facilitate system integration.

Features:

  • Compact 3U cPCI SBC with support for 3 independent, smart function modules
  • 70+ modules to choose from
  • Independent x1 SerDes interface to each function module slot
  • COSA® architecture
  • ARM® Cortex®-A9 Dual Core 800 MHz Processor
  • 512 MB DDR3L SDRAM
  • Up to 32 GB SATAII NAND Flash (4 GB standard)
  • < 5 W MB power dissipation
  • System controller or peripheral option
  • Front and/or rear I/O
  • 2x 10/100/1000 Base-T Ethernet; 2 to rear, or 1 to rear and 1 to front I/O
  • 1x RS232 to front or rear I/O
  • I2C Bus to rear I/O
  • Wind River® VxWorks® and Xilinx® PetaLinux OS support
  • Intelligent I/O library support available
  • Continuous Background Built-In-Test (BIT)
  • VICTORY Interface Services (contact factory)
  • Commercial and rugged versions
  • Operating temperature:  0° C to +70° C commercial, or -40° C to +85° C rugged

The post 3U cPCI SBC Model 75ARM1 appeared first on Promo Electronics.

]]> 3U cPCI SBC Model 75INT2 https://promoltd.co.il/promo_products/3u-cpci-sbc-model-75int2/ Sun, 05 Jul 2020 10:07:11 +0000 https://promoltd.co.il/?post_type=promo_products&p=1082 NAI’s 75INT2 is a 3U cPCI Intel® Core™ i7-based, Single Board Computer (SBC) that can be configured with up to two smart function modules and delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems.

The post 3U cPCI SBC Model 75INT2 appeared first on Promo Electronics.

]]> NAI’s 75INT2 is a 3U cPCI Intel® Core™ i7-based, Single Board Computer (SBC) that can be configured with up to two smart function modules and delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems.

NAI’s Intel® Core™ i7 SBCs in the 3U cPCI form factor offer improved processor performance and better security, targeted at military and defense applications such as manned and un-manned air and ground vehicles, and in more sophisticated digital signal processing applications such as intelligence, surveillance, reconnaissance, radar and sonar.

The 75INT2 includes BSP and SSK support for CentOS, Red Hat®, Linux®, and Windows® Embedded Standard 7. In addition, SSKs are supplied with source code and board-specific library I/O APIs to facilitate system integration.

Features:

  • Compact 3U cPCI SBC with support for 2 independent, smart function modules
  • 70+ modules to choose from
  • Independent x1 SerDes interface to each function module slot
  • COSA® architecture
  • Intel® Core™ i7-3517UE @ 1.5 GHz Dual Core Processor
  • Up to 8 GB DDR3L SDRAM
  • Up to 32 GB SATA II NAND Flash (256 GB expansion option in slot #2)
  • < 25 W MB power dissipation
  • Front and/or rear I/O
  • 2x 10/100/1000 Base-T Ethernet; 2 to rear, or 1 to rear and 1 to front I/O
  • PCIe interface to function module slot 1 for additional dual Gig-E ports
  • 2x USB 2.0, 1 to front and 1 to rear, or 2 to rear I/O
  • 1x RS232 to front or rear I/O
  • I2C Bus to rear I/O
  • Factory configurable video output: HDMI, DVI, LVDS, or VGA
  •  CentOS, Red Hat®, Linux®, and Windows® Embedded Standard 7 support
  • Intelligent I/O library support available
  • Continuous Background Built-In-Test (BIT)
  • VICTORY Interface Services (contact factory.)
  • Commercial and rugged versions
  • Operating temperature:  0° C to +70° C commercial, or -40° C to +85° C rugged

The post 3U cPCI SBC Model 75INT2 appeared first on Promo Electronics.

]]>